Best Plasma Cutters

We have listed some Best Plasma Cutters which comes with amazing features that can help in your day-to-day life. While you are going to spend your money on your online shopping it is good to compare these top products in your category and make a good decision that will help you in the future. So you can check out this list below before you go online shopping.

9.7
Score
$389.76
in stock
2 new from $389.76
Best Plasma Cutters 1 Amazon.com
Free shipping
8.3
Score
$12.99
in stock
1 new from $12.99
Best Plasma Cutters 1 Amazon.com
Free shipping
7.8
Score
$8.50
in stock
2 new from $5.00
Best Plasma Cutters 1 Amazon.com
Free shipping
6.6
Score
$279.00
$335.00
in stock
2 new from $279.00
Best Plasma Cutters 1 Amazon.com
Free shipping
5.3
Score
$439.99
in stock
7 new from $439.99
Best Plasma Cutters 1 Amazon.com
Free shipping

Top 10 Best Plasma Cutters

Top 10 Best Plasma Cutters

We have done much research and reviewed many products in the same category, and here we have listed the top 10 Best Plasma Cutters that you can take a look at and choose the best one that is perfect for your requirement. Choose the Best Plasma Cutters that values the money and time that you are investing in your online shopping.

So, Check out our Top 10 Best Plasma Cutters that are listed below and get the perfect one for you!

LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown

$389.76  in stock
2 new from $389.76
Free shipping
View Deals
Best Plasma Cutters 1 Amazon.com
as of August 20, 2021 12:04 pm

Features

  • ★ NON-TOUCH PILOT ARC PLASMA CUTTER: efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTP5000D Plasma Cutter are "PCS22" or "PCS33". Please search "Lotos PCS22" or "Lotos PCS33"; ★ NOT compatible with Lotos PCON40 or PCON90 Consumables Sets or any other third part consumables set
  • ★ OUTPUT & PERFORMANCE: 10-50 A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • ★ SETUP WITHIN 1 MIN: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.

PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year Warranty

$675.00  in stock
1 new from $675.00
View Deals
Best Plasma Cutters 1 Amazon.com
as of August 20, 2021 12:04 pm

Features

  • CUT60 PILOT ARC 3 year warranty 7 day per week support in USA
  • PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION
  • Blow-back start technology, Pilot Arc
  • 60% duty cycle at 60amps, 110/220 with adapter
  • Continuous Pilot Arc enables you to cut expanded, rusted, painted metals

PrimeWeld 50A Air Inverter Plasma Cutter with Non-Touch Pilot Arc, Automatic Dual-Voltage (110V/220V) and Dual-Frequency (50Hz/60Hz) Portable Plasma Cutter, 1/2" Clean Cut, CUT50DP

$399.00  in stock
1 new from $399.00
View Deals
Best Plasma Cutters 1 Amazon.com
as of August 20, 2021 12:04 pm

Features

  • PLASMA CUTTING EQUIPMENT: This versatile plasma cutting machine uses non-hazardous compressed air to cut metals. Great for stainless steel, carbon steel, copper, aluminum and more. Cutting thickness is 1/2" for Clean Cut and 3/4" for Severance Cut.
  • PILOT ARC: Includes integrated Matrix with Pilot Arc function to efficiently cut through rough, painted and rusty metal with less slag. In addition, the dual-voltage capability allows you to run directly on 220V 50/60Hz power, or on 110V 50Hz/60Hz.
  • MANY USEFUL FEATURES: This 50-Amp plasma cutter has an operating air pressure of 75 PSI at 5 CFM. It also includes a PAPST Advanced German cooling system and a MOSFET transistor, allowing you to cut thin metals or thicker metals.
  • COMPACT AND PORTABLE: This compact plasma cutter has a built-in handle for easy portability around your workshop or jobsite. This plasma cutter kit includes a plasma torch, ground clamp with cable, air regulator, air hose and air hose connections.
  • GREAT CUSTOMER SERVICE: Backed by a 3-year warranty, we're committed to after-sales service. When you contact us, you speak with real technical specialists and representatives, and our USA-based parts and customer service is available 7 days a week.

PT-31 Roller Guide Wheel Spacer Stand-off for Plasma Cutter Torch CUT40 CUT50D LGK40 LG40

$12.99  in stock
1 new from $12.99
Free shipping
View Deals
Best Plasma Cutters 1 Amazon.com
as of August 20, 2021 12:04 pm

Features

  • Two wheels spacer roller guide——The upgrade double wheel roller guide can fit PT-31 torch / LG40 torch, double wheel roller guide can help PT31 torch maintain balance during cutting
  • Applicable Plasma Torch model——The PT-31 Roller Guide can fit PT-31 / LG-40 plasma cutting torch which can work CUT-40, CUT-50, CUT-50D, LGK-40 plasma cutter machine
  • Can fit different types of PT31 torch——The positioning screws on the Roller guide can help to follow and fix different types of PT31 plasma cutting torch
  • Wheel height can be adjusted——The two wheels of the Roller guide can be adjusted in height, up to 1.81in / 46mm
  • PT-31 plasma cutting consumables, aftermarket part, not original; We provide free after-sales consulting services

P-80 Plasma Cutter Roller Guide Wheel Spacer circle compass stand off Fit Pilot Arc Starting

$8.50  in stock
2 new from $5.00
Free shipping
View Deals
Best Plasma Cutters 1 Amazon.com
as of August 20, 2021 12:04 pm

Features

  • fit P80 P-80 Plasma Cutter torch

Lotos PCS22 Plasma Cutter Consumables Sets for Brown Color LTP5000D and Brown Color LTPDC2000D (22)

$48.47  in stock
2 new from $48.00
Free shipping
View Deals
Best Plasma Cutters 1 Amazon.com
as of August 20, 2021 12:04 pm

Features

  • Only Compatible with BROWN Color Lotos LTP5000D, LTPDC2000D.
  • NOT Compatible with Red Color Lotos LTP5000D, LTPDC2000D.
  • Includes: 10 Nozzles 10 Electrodes 1 Cup 1 Stand Off Guide
  • NOT Compatible with any other Brand and any other Model of plasma cutters
  • Nozzles and electrodes are made by genuine 100% copper instead of cheap plated copper alloy

Lotos LT5000D Plasma Cutter 50Amps Dual Voltage Compact Metal Cutter 110/220V AC 1/2" Clean Cut

$335.00
$279.00  in stock
2 new from $279.00
Free shipping
View Deals
Best Plasma Cutters 1 Amazon.com
as of August 20, 2021 12:04 pm

Features

  • ★ Air PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33"; ★ It CANNOT compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set
  • ★ SETUP WITHIN 1 MIN: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
  • ★ OUTPUT & PERFORMANCE: 10-50 A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)

Lotos Non-Touch Pilot Arc CNC Enabled Plasma Cutter, Digital Control, THC Torch Height Control, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP CNC)

$549.00  in stock
2 new from $549.00
Free shipping
View Deals
Best Plasma Cutters 1 Amazon.com
as of August 20, 2021 12:04 pm

Features

  • ★ PORTABLE and POWERFUL--The LTP5500D can easily cut 3/5” (15 mm) metal with ultimate portability weighing only 15lbs; The LT5500D is an excellent choice for home DIY jobs and light duty small business projects.
  • ★ CNC ENABLED Pre-installed CNC Interface with THC (Torch Height Controller) signal output. Non-HF Blowback Start, there is no HF interference on your CNC computer.
  • ★ SETUP WITHIN 1 MIN--the per-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start 14ft torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.
  • ★INPUT: Automatic Dual Voltage 110~125V or 215~245V. Fully Output Circuit Breaker Requiement: 110V @ 50A and 220V @ 40A. Air Compressor Requirement: 70 PSI @ 4.0SCFM. ★OUTPUT: 20-55 A DC output, 3/5” ideal clean cut and 1” maximum severance cut under 220/240V. 20-35A DC output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120V. ★SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • ★ SATISFACTION GUARANTEED--with confidence, as we offer 30-days refund/replacement and 1 year warranty. ★ FEEL FREE TO CONTACT US--our customer Care team is always ready to help. Naturally, we hope you don't encounter any problems, but when they crop up, our customer support is there to help! we will provide the Best solution for you.

Jack&Dave 100 Pcs Plasma Cutting Consumables (Standard) Fit Cut40 50 with Plasma Cutter Torch PT31 LG40

$25.80  in stock
1 new from $25.80
Free shipping
View Deals
Best Plasma Cutters 1 Amazon.com
as of August 20, 2021 12:04 pm

Features

  • 100PCS Plasma cutting consumables Common
  • Package Include:10 Pcs Cup 30 Pcs Electrodes 20 Pcs Ring 40 Pcs Tip(Common)
  • Fits Stahlwerk CT312, CUT50, ACDC TIG200 PLASMA, CT520, CT512P with PT-31 GUN
  • Fit PT31-GUN
  • For 40 50 Amps Cutting Machine

Forney Easy Weld 251 20 P Plasma Cutter,Green, 20 Amp

$439.99  in stock
7 new from $439.99
Free shipping
View Deals
Best Plasma Cutters 1 Amazon.com
as of August 20, 2021 12:04 pm

Features

  • CUTS- Mild steel, aluminum and stainless steel from thin material to 1/4"* (6.35 millimeters) with ease! *(Mild Steel)
  • EASY TO USE- All you need is 120 volt power source and 1.5 CFM of compressed air. Built in regulator and air dryer make operation a breeze
  • DRAG TORCH TECHNOLOGY- Allows you to drag cutting tip in direct contact with the metal you're cutting for smooth consistent clean cuts
  • LIGHT AND PORTABLE- Forney's 120-volt 20 P Plasma Cutter is generator friendly so on the go cutting and moving to different job sites is possible
  • RUGGED- All metal case. Built to take the day to day
Scroll to Top